Filter
Top Products
21
Accessing held jobs from the operator panel
1 To access held jobs from the operator panel:
– If the printer is Busy, press Menu and the Job Menu appears.
– If the printer is Ready, continue to step 2.
2 Press Menu until you see Held Jobs or Confidential Job on the operator panel display,
depending on the type of job you want to access.
3 Press Select.
Note: If you are looking for a Confidential Job, you are prompted to enter your PIN. See
Confidential jobs for more information.
4 Press Menu until the action you want to take appears on the second line of the operator panel
(print a job, delete a job, and so on).
5 Press Select.
– If you are looking for one particular job, press Menu to scroll through the list of jobs
available, and press Select when the correct job is displayed. An asterisk (*) appears next
to the job name indicating you have chosen to print or delete that job.
– If you are prompted to enter the number of copies you want to print, use Menu to increase
or decrease the number on the operator panel, and press Select.
6 Press Go to print or delete specific jobs you have marked.
The printer briefly displays messages indicating what print and hold functions it is performing,
and then returns to the Ready state.
Recognizing when format errors occur
If the symbol appears on the display, it indicates that the printer had trouble formatting one or more
of the held jobs. These formatting problems are most commonly the result of insufficient printer
memory or invalid data that might cause the printer to flush the job.
When a symbol appears next to a held job, you can:
• Print the job. Be aware, however, that only part of the job may print.
• Delete the job. You may want to free up additional printer memory by scrolling through the list
of held jobs and deleting others you have sent to the printer.
If formatting errors are a recurring problem with held jobs, your printer may require more memory.