Filter
Top Products
Scenario 5: Country‑ or region‑specific setup
Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted
by most countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a
telephone cable that has an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack.
The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ‑11
connectors. If you have a different type of connector in your country or region, then you may need to use
an RJ‑11 adapter.
Connecting the printer to a non‑RJ‑11 wall jack
EX
T
LIN
E
To connect:
1 Connect one end of a telephone cable to the port of the printer.
2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall
jack.
3 If you want to connect another device (telephone or answering machine) to the same wall jack, and
if the device has a non‑RJ 11 connector, then connect it directly to the wall jack.
Setting up the printer to fax 35