Filter
Top Products
RX Operation
Facsimile Programming 4 - 38
12
Enter the 20-digit Polling ID.
13
Enter the 20-digit Polling Password. This number
is set at the remote location and you must match it
when sending to them.
Note: Polling Passwords must be set at both
units and must match for Polling to work.
14
If you wish to poll more than one location, enter
that location. When you are done entering the data,
press START to enter the data into memory.
Note: You can enter the locations by numeric Keys or One-Touch Key,
Speed Dial Key but if the key is programmed Group Dial or Program Dial, is
forbidden, because each polling Group contains Max. 10 locations only.
POLLING ID=_
OK=YES (DEL=NO)
POLLING PW=_
OK=YES (DEL=NO)
NO. 002=_
(Fin.=START)