Filter
Top Products
Advanced Operations of Internet Fax
Internet Fax(Option) 5-14
Advanced Operations of Internet Fax
Broadcast
The procedure to send an E-mail message to multiple locations are very similar to the
procedure used to send a fax message to multiple locations. You can send a message to a
total of 148/180 locations. These locations can be either E-mail addresses or telephone
numbers, but the Max of E-mail address is 50 locations only.
This operation is different than a Group Dial. A Group Dial will send a message to
multiple locations, but the group list is programmed in the machine. The TX Broadcast
Function is for one time only, and the locations must be entered each time. If you send a
message to the same locations frequently, you should consider using Group Dial.
1 Press the documents in the Document Feeder.
2 Press the FUNCTION Key and enter 1 to select the
Broadcast function.
3 You can use One Touch or Speed Dial locations by
pressing the appropriates keys. You also can press
the MAIL Key and enter the E-mail address and
select either “TO” or “C.C.” for the message to this
location.
4 When all the locations have been enter, press
START to begin the Broadcast session.
ENTER FAX NO.
or FUNCTION
1.BROADCAST
NO.001=
TO=
(TO=YES,CC=PROG)
NO.002=
(FIN.=START)