Filter
Top Products
Machine Operations
Facsimile Programming 4 - 10
Setting Your Fax Line Type (PSTN/PBX)
Select either PSTN or PBX depending on how your phone is connected. If your unit is
connected to the public switch telephone network (PSTN), you should select “PSTN.
Otherwise, you should select “PBX.”
1
Press the PROGRAM Key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Press YES since this is the first menu to appear.
3
Use the Left/Right Arrow Keys to select either
PSTN or PBX and press YES.
Note: With a PBX system. you generally have to dial a prefix number (e.g.
“9”) to access an outside line. If you set the line type to “PBX”, you can set
the prefix number in advance. Then the unit can dial the prefix number for
you whenever you dial. The following table shows you how to dial when using
the PBX mode. The prefix can be up to 4 digits in length.
When you are in the PBX mode, pressing # causes the machine to dial the
programmed access number(s). If you are dialing from within a PBX and
dial the extension number within the PBX the “@” symbol is displayed.
Phone Line Telephone Number LCD Display/Dialing Access Line
PBX mode, prefix=9 123 @123 PBX
PBX mode, prefix=9 #123 9-123 PBX->PSTN
MACHINE OPERATION?
YES / or 1-8
6 PSTN/PBX?
OK=YES
*PSTN PBX
-SELECT&PUSH”YES”-