Filter
Top Products
Setting Up Fax Unit
A - 9 Unpacking & Installation
Loading Paper
1
Remove the shipping tape
from the Tray Cover.
2
Remove the Tray Cover.
3
Remove the shipping tape
and foam from inside the
Tray cavity.
4
If you are loading Letter or
A4 size paper, pull the Tray
Extension out to the first
stop.
5
If you are loading Legal size
paper, lift the Tray
Extension slightly and pull it
out to the second stop.
6
Place a piece of paper in the
tray and test to see the Side
Guides are in the correct
position for your paper.
7
To change the positions of
the Guides to a new size
paper, snap them out and re-
locate them.
8
Place paper in the Tray and
push the Tray Extension in
against the end of the paper.
Note: Refer to the Specifications Chapter for information on what type
and size papers can be fed from this Tray.
9
Replace the Tray Cover.
Note: When placing paper in the Tray, always remove any remaining
paper and place it on top of the new paper.