Filter
Top Products
POD Farm 1.01 – Glossary (What Is...?)
9•22
For descriptions of all the Signal View elements, please see the Signal Flow View section in the Plug-In
chapter.
p Return to What Is Topics
What is a Sound Card?
A sound card is the piece of hardware in (or attached to) your computer that plays back and receives
sound into the computer for recording or other uses. The purpose of a sound card is to convert audio
from analog to digital (for recording into your computer) and to convert digital audio to analog (to
send to speakers so you can hear it). Line 6 POD Studio, TonePort, GuitarPort, POD X3 and PODxt
devices all operate as USB sound cards, since they utilize high performance audio drivers and can be
accessed by most any audio software on your Mac or Windows computer for quality audio recording
and playback. Additional information is provided in the Recording Setup Guide on the POD Farm
Online Help section of the Line 6 web site.
p Return to What Is Topics
What is Tap Tempo?
Please see What are the FX Time/FX Speed controls? earlier in this chapter.
p Return to What Is Topics
What is ToneDirect™ Monitoring?
Available within POD Farm when run in Standalone operation, ToneDirect™ Monitoring is a
unique feature of your Line 6 hardware which feeds your POD Farm tones directly out the Line 6
hardware’s outputs (rather than strictly into your computer software). This provides a separate audio
path allowing you to monitor your input signal with the lowest possible latency, for uncompromised
feel and responsiveness when recording or jamming. Launch POD Farm in Standalone mode alongside
your DAW software and you can dial in whatever Tone you want to monitor your performance with
super low latency. By using the POD Farm Mixer View, you can then independently choose what feed
to the Record Sends, which go out to your DAW software to be recorded - be it the fully processed
Tone you are monitoring, or a “naked”, unprocessed tone. Recording an unprocessed tone allows you
to utilize the POD Farm Plug-In on the recorded track, and then choose or change your Tone settings
at any time in your DAW project! Check out the ToneDirect™ Monitoring section in the Hardware
Chapter.
p Return to What Is Topics