POD Farm 1.01 – Driver Panel & Recording
3•6
TonePort UX8 has a larger set of options - see the next section for its Inputs & Recording tab.
Record Sends Info box: One line for each Record Send appears here along with a general description
for the signal each Send is carrying. Refer to your specific Line 6 device type in the following
descriptions.
Note that multiple Sends for your Line 6 device are only available when using the ASIO driver
in your recording software. If your recording software is configured to access the device via its
WDM or DirectSound driver, then only one Send will be available in the recording software
(Send 1-2).
POD Studio, TonePort & GuitarPort devices (except UX8) show the following Sends:
TonePort devices show two stereo Sends (Record 1-2 and Record 3-4)
Single Tone Source (Mono/Stereo): When the POD Farm Standalone application is not •
running, Record Send 1-2 and 3-4 both carry the unprocessed signal. When running POD Farm
Standalone, Record Send 1-2 and 3-4 carry the type of signal defined within POD Farm’s Mixer
View - Record Send Source menus (Processed, Semi-Processed or Dry) - see the POD Farm
Standalone - Mixer section for details.
POD X3 devices show a list of 5 Record Sends: