Line 6 GX Computer Hardware User Manual


 
POD Farm 1.01 – Driver Panel & Recording
3•5
The Vista Control Panel>Sounds>Properties - Advanced tab
11 – ToneDirect Monitoring Buffer Size: This slider adjusts the buffer size for the audio responsiveness
of the ToneDirect Monitoring signal. Basically, the default setting should be fine for most systems, but
if getting audio dropouts or working with large CPU demands on your system, raise the slider a notch
or two to the right until it alleviates the problem. Please see the ToneDirect Monitoring section for
more details.
Inputs & Recording Tab - Windows
Input Source Menu: This allows the user to select which physical input “source” is used on the Line 6
USB hardware (Mic 1, Instrument, etc.). Note that this menu is ONLY selectable when the POD Farm
Standalone software is not in use by the Line 6 hardware. When POD Farm is in use, it remains grayed
out, but displays the current Source that is selected within POD Farm Standalone.
When POD Farm Standalone is not in use by the selected Line 6 device, this Input Source menu, like
the POD Farm Tone 1 Input Source menu, offers a list of input options.
GX, DI and GuitarPort are always “fixed” to only route their “instrument” 1 /4 input signal into
POD Farm Standalone.
PODxt & POD X3 devices do not offer an Input Source menu in this dialog.