Linksys WAG325N Network Router User Manual


 
Chapter 3
Advanced Configuration
28
Wireless-N ADSL2+ Gateway
Ping Test
Ping Test Parameters
The ping test checks the status of a connection.
Ping Target IP Enter the IP address that you want to
ping. This can be either a local (LAN) or Internet (WAN) IP
address.
Ping Size Enter the packet size you want to use. The
default is 60 bytes.
Number of Pings Enter how many times you want to
ping. The default is 1.
Ping Interval Enter the number of milliseconds between
pings. The default is 1000 milliseconds.
Ping Timeout Enter the number of milliseconds before the
ping test will time out. The default is 5000 milliseconds.
Start Test To run the test, click this button. The Ping Test
screen will show if the test was successful. Click Close to
return to the Diagnostics screen.
Diagnostics > Ping
Ping Result The results of the ping test are displayed.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Backup & Restore
The Backup & Restore screen allows you to back up or restore
the Gateway’s settings using a configuration file.
Administration > Backup & Restore
Backup Configuration
Backup To save the Gateway’s settings in a configuration
file, click this button and follow the on-screen
instructions.
Restore Configuration
To use this option, you must have previously backed up its
configuration settings.
Please select a file to restore Click the Browse button
and select the Gateway’s configuration file.
Restore To restore the Gateway’s configuration settings,
click this button and follow the on-screen instructions.
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you to
restore the Gateway’s configuration to its factory default
settings.
Administration > Factory Defaults
NOTE: Restoring factory defaults deletes custom
settings. Note your custom settings before
restoring the factory defaults.
Factory Defaults
Restore Factory Defaults To reset settings to the
default values, click this button and follow the on-screen