Filter
Top Products
EtherFast Cable/DSL Routers
Buttons & Switches
The Reset Button Information on the
Reset button can be
found on page 5.
The Crossover Switch The Crossover
Switch ( II X )
toggles the LAN
port between
crossover mode (X)
and straight-through
mode (II). If you are connecting the Router directly
to a computer or to an Uplink port, choose
crossover (X). For anything else, choose straight-
through (II).
The One-Port Router’s Front Panel LEDs
The LAN Indicators
Power Green. The Power LED illuminates when the Router is pow-
ered on.
Link/Act Green. The Link/Act LED serves two purposes. If the LED
is continuously illuminated, the Router is successfully con-
nected to a device through the LAN port. If the LED is
flickering, the Router is actively sending or receiving data
over the LAN port.
7
NNoottee::
If you aren’t
sure whether to
choose crossover
or straight-through
on the crossover
switch, a good indicator is to
check the Link LED on the front
of the Router. If the Link light is
not illuminated after the router is
fully installed and configured, try
switching the crossover switch
over to the other option. If the
Link LED illuminates then, you
have made the correct choice.
BEFSR41 User Guide Apr 2000.qxd 4/27/00 3:20 PM Page 7