Filter
Top Products
EtherFast Cable/DSL Routers
15
Configuring Your PCs to Connect to the
Cable/DSL Router
Now that your Router is configured, you will have to
configure your other PCs to accept the IP addresses
that your Router will provide.
These instructions apply only to Windows 95 and Windows 98
machines. For TCP/IP setup under Windows NT, please refer to
your Windows NT manual.
1. Click the Start button, select Settings, then Control Panel.
2. Double-click the Network icon.
3. In the Configuration window, select the TCP/IP protocol line that has
been associated with your network card/adapter. If there is no TCP/IP line
listed, go to page 39 to install the TCP/IP Protocol now.
NNoottee::
Ensure that a
Network Card or
adapter has been suc-
cessfully installed into
each PC you plan on
configuring prior to
continuing.
BEFSR41 User Guide Apr 2000.qxd 4/27/00 3:20 PM Page 15