Filter
Top Products
Instant Broadband Series
12
Configuring Your Network with
the Cable/DSLRouter
Configuring the Cable/DSL Router
Now that your Cable/DSL Router is wired into your net-
work, you can begin configuring your system.
1. Open your web browser and type http://192.168.1.1 in the
browser’s Address box. This number is the default IP address of your
router. Press Enter.
2. A username and password prompt will appear. Leave the User Name
box empty and type admin (the default password) in the Password box.
Click OK.
NNoottee::
If the TCP/IP
protocol is not config-
ured on your PC, go
to page 39 of the
Appendix for TCP/IP
installation instruc-
tions now.
NNoottee::
If you have previously enabled an Internet Sharing
Proxy Service on any of your PCs, you must disable it
now.
• If you are running Netscape Navigator: Click
EEddiitt
>>
PPrreeffeerreennccee
>>
AAddvvaanncceedd
>>
PPrrooxxiieess
> and click
DDiirreecctt CCoonnnneeccttiioonn ttoo tthhee IInntteerrnneett
.
• If you are running Internet Explorer v5 or better, click
SSttaarrtt
>>
SSeettttiinnggss
>>
CCoonnttrrooll PPaanneell
>>
IInntteerrnneett OOppttiioonnss
>>
CCoonnnneeccttiioonnss
>>
LLAANN SSeettttiinnggss
. Remove the check on the proxy setting. Click
OOKK
to
continue.
BEFSR41 User Guide Apr 2000.qxd 4/27/00 3:20 PM Page 12