Filter
Top Products
The Status Information screen, shown in Figure 5-11, allows you to check the
details and status of the Instant GigaDrive™.
System GigaDrive Name - The current name. This name will be shown
in "Network Neighborhood" or "My Network Places".
IP Address - IP Address currently used by the Instant
GigaDrive™.
Current Status - Indicates the current status of the Server. This
will usually state "Ready". If the Server is not available, the
message will say why the Server is not available (e.g., Scandisk
in Progress.)
Setup menu ALWAYS performs these functions. Check the
Enable Disk Quota of box if you want to set the disk usage
limit for the user. Enter the maximum amount of disk space the
user is allowed to use. Click the Clear Form button to clear
the form for the entry of a new user. Click Save as new User
to create a new user, after entering their data in the Properties
fields. Click the Save button to save any changes you have
made to the properties for an existing user. To modify the prop-
erties for an existing user, select the desired user from the list.
Their details will be displayed in the Properties fields. Edit the
fields as required. Note that you cannot change the Create
matching Group and Share Folder option when modifying a
user. However, you can use the Share (Private Folder) Location
field to change the location of a user's Private Folder, if it
already exists. Click the Save button to save your changes.
EtherFast
®
Network Attached Storage
28
Figure 5-11
Administration Tab - Status Information
Instant GigaDrive
TM
Series
27