Filter
Top Products
EtherFast
®
Network Attached Storage
This Welcome screen provides you with four options in the buttons along
the right side of the screen. The first button is the Setup button. Click this
button to continue with the setup procedure. The second button is the User
Guide button. The third button, Linksys Web, connects you to the Linksys
web site if you have an active Internet connection. Lastly, clicking the Exit
button will exit the Setup Wizard.
The remainder of this chapter addresses the setup procedure you would follow
by clicking the Setup button.
3. From the following screen, shown in Figure 4-2, the Setup Wizard will
automatically search for any Instant GigaDrive™ currently on your network
or attached to your PC. If it fails to detect the Instant GigaDrive™ or if an
Instant GigaDrive™ has been installed since the Setup Wizard’s last search,
click Search Again to locate the Instant GigaDrive™.
10
Instant GigaDrive
TM
Series
Chapter 4: Using the Instant
GigaDrive’s Setup Wizard
Now that everything is connected and powered on, you are ready to configure
the Instant GigaDrive™ so that it is accessible to the users on your network.
You will have to run the Instant GigaDrive’s Setup Wizard on your PC to access
the Instant GigaDrive’s Quick Setup feature. To run the Setup Wizard on your
Windows 98, Me, NT 4.0, 2000, or XP PC, follow the instructions below.
1. Insert the Setup Wizard CD-ROM into your PC’s CD-ROM drive.
2. An autorun menu should appear a few seconds after you insert the CD into
your CD-ROM drive. If the autorun menu does not appear after a minute,
click the Start button, select Run, type D:\SetupUtility.exe (where D is
the letter of your CD-ROM drive) into the Open window and press Enter.
The autorun menu appears as shown in Figure 4-1.
9
Figure 4-2
Figure 4-1