Filter
Top Products
EtherFast
®
Network Attached Storage
10. From the Add Printer Wizard screen, shown in Figure C-9, select your
printer’s manufacturer from the list on the left. Then, select your printer’s
model from the list on the right. Once you’ve selected your printer, click
the OK button.
11. This final installation screen, shown in Figure C-10, will allow you to
review your choices before finishing the installation process. Verify that
all of the settings are correct before clicking the Finish button. If anything
is not correct, click the Back button to correct the settings.
46
8. The next screen will request how the printer will be located by the
GigaDrive. Select Type the Printer name, or click Next to browse for a
printer. Then, in the field below, enter this location in the following for-
mat: \\Lkg(last six digits of the server name located on the back of the
GigaDrive)\Lkg(last six digits of the server name located on the back
of the GigaDrive)_p1. This is the format used by default to locate the
printer.
In the example shown in Figure C-7, the last six digits of the server name
are 0F0016. Therefore, the information entered is:
\\Lkg0F0016\Lkg0F0016_p1.
After you have entered this information, click the Next button.
9. The next screen, shown in Figure C-8, will ask you to install a printer driv-
er. Click the OK button to do this now.
Instant GigaDrive
TM
Series
45
Figure C-7
Figure C-8
Figure C-9
Figure C-10