Filter
Top Products
10. Lock the tray into the GigaDrive’s bay, as shown
in Figure B-8. The tray must be locked in for the
GigaDrive to properly function.
11. Plug in the GigaDrive and power it back on.
12. Now, access the GigaDrive’s Web-Based Utility,
by typing http://192.168.1.77 in the PC’s web
browser address
window, as shown
in Figure B-9.
13. Click the Administration tab
and select Disk. Under Format
Disk, Disk 2 will show a status
of Not Formatted. Click the
Format Disk button for Disk 2
to format that hard drive.
14. When formatting is complete, the hard drive is ready to use.
8. Insert a screw through the tray’s left
side, as shown in Figure B-6, and into
your drive. To tighten it and secure
the drive to the tray on the right, you
will need a narrow screwdriver to fit
through the hole as shown.
9. Slide the drive into the second
drive bay, as shown in Figure B-7.
EtherFast
®
Network Attached Storage
42
Important: Formatting
a hard drive will delete
all information from
that drive. Always verify
that you do not wish to
save any information on
the drive before format-
ting it.
Figure B-8
Figure B-9
Figure B-10
Instant GigaDrive
TM
Series
41
Figure B-6
Figure B-7