Filter
Top Products
20
Chapter 5: Setting Up and Configuring the Router
Setup Tab - Network
10/100 8-Port VPN Router
Transparent Bridge
Transparent Bridging is used when you have two large networks that you wish to bridge together. Your network
administrator should fill in the information for both network segments, including the range of IP addresses each
network includes. When this is selected, the WAN and LAN must be in the same subnect and only one WAN port
can be set in Transparent Bridge mode.
Heart Beat Signal
Heart Beat Signal is a service used in Australia only. If you are using a Heart Beat Signal connection, check with
your ISP for the necessary setup information.
Figure 5-10: WAN Connection Type - Transparent Bridge
Figure 5-11: WAN Connection Type - Heart Beat Signal