Filter
Top Products
21
Chapter 5: Setting Up and Configuring the Router
Setup Tab - Time
10/100 8-Port VPN Router
Setup Tab - Password
The Router's default User Name and Password is admin. For greater network security, you should change the
Router's password from this default. If you leave the password field blank, all users on your network will be able
to access the Router simply by entering admin into the password field.
Old Password: Enter the old password.
New Password: Enter a new password for the Router. Your password must be less than 64 alphanumeric
characters long and it can’t contain any spaces.
Confirm New Password: Re-enter the new password for confirmation.
Click the Save Settings button to save the Password settings or click the Cancel Changes button to undo the
changes.
Setup Tab - Time
Time
The Router uses the time settings to time stamp log events, to automatically update the Content Filter List, and
for other internal purposes.
Set the local time with Set the local time using Network Time Protocol (NTP) automatically or Set the local
time Manually. When you choose to have the time set by using Network Time Protocol, the Router will
automatically connect to an NTP server, providing the correct time.
Automatic: Select the Time Zone and enter the Daylight Saving and NTP Server. The default Time Zone is Pacific
Time.
Manual: Enter the Hours, Minutes, Seconds, Month, Day and Year.
Click the Save Settings button to save the Time settings or click the Cancel Changes button to undo the
changes.
NOTE: The password cannot be recovered if it is lost or forgotten. If the password is
lost or forgotten, you have to reset the Router to its factory default settings.
Figure 5-12: Setup Tab - Password
Figure 5-13: Setup Tab - Time