Filter
Top Products
78
Appendix B: Installing the Linksys VPN Client
10/100 8-Port VPN Router
Appendix B: Installing the Linksys VPN Client
When using your PC to log onto the Router from remote locations, you’ll want to use the Linksys QuickVPN Client.
Installing this Client takes just a few steps, provided below.
1. Insert the RV082 User Guide CD into your PC’s CD-ROM drive.
2. Click the Start button, select Run, and, in the window that appears, type D:\Linksys_QuickVPN_1028.exe
(where D: is your CD-ROM drive). Then, click the OK button. The Client will immediately begin installing the
software onto your hard drive at C:\Program Files\Linksys\Linksys VPN Client.
3. The License Agreement screen will appear. Read the agreement and click the Yes button to proceed. Clicking
the Back or No buttons will close the installation.
4. The Linksys VPN Client software will now be installed. When it is finished, an screen will appear to tell you
that the installation is complete. Click the Finish button.
Figure B-1: Linksys VPN License Agreement
Figure B-2: Linksys VPN Installation Complete