Filter
Top Products
Introduction
Issue 1 June 1998 1-9
Considerations
Keep the following in mind when you use the DEFINITY Extender
1100 System:
■
The DEFINITY Extender 1100 System is to be used with a
DEFINITY ECS of Release 3, Version 3 or later.
■
No custom calling features, such as Call Waiting or Call
Forwarding, should be ordered for the line to which you
connect the Switch Module.
NOTE:
A Call Waiting tone causes an interruption in the call, and the
DEFINITY Extender 1100 System will begin the reconnect
sequence.
■
Sessions can be established only from the Remote Module.
■
Only one Remote Module at a time can be “on-line” with the
Switch Module.
■
Order a separate central office (CO) line for each Switch
Module and each Remote Module. Sharing lines or bridging the
line on another station causes problems. For example, picking
up an extension telephone causes the DEFINITY Extender
1100 System call to drop.
■
Be sure that the DEFINITY ECS port to which the Switch
Module is connected is programmed correctly for the telephone
being used.
■
Authorized connections require that a password 8 to 10 digits in
length be entered from the Remote Module. You should always
use the full 10 digits.