Filter
Top Products
Configuration
Issue 1 June 1998 2-13
■
Each password begins with two digits (00–99). The “00”
password is reserved for the system administrator and can be
used to change any of the remaining passwords.
!
Security Alert:
Change your system administrator password as soon as
possible, and store the new password in a secure place.
Programming Passwords Procedure
Follow these steps to program passwords for the Remote Module
users:
1. If you are already in the DEFINITY Extender 1100 System
programming menu, skip to Step 2. If you are not in the
programming menu but the unit is powered, simply power down
unit, and type “MENU” while the LED flashes yellow to access
the programming menu from your PC.
When you type “MENU,” the Main Menu appears:
2. Select Configure System from the Main Menu.
The Configure System Menu appears.
3. Select Password from the Configure System Menu, and press
Enter.
The screen prompts you to enter your administrator password.