Lucent Technologies 1100 Switch User Manual


 
Configuration
2-6 Issue 1 June 1998
You can select a menu item by:
Using a hot key (the number of the menu item).
Using the arrow up and arrow down keys.
Pressing the Enter key when your menu selection is
highlighted.
Although rare, you may find the display becomes unrecognizable
on occasion. If this occurs, press CTRL R to refresh the display.
You can modify the parameters accessed by the menu by
pressing:
The Delete key to erase the highlighted parameter, or the
Backspace key to erase the character to the left of the cursor.
Press the left arrow and right arrow keys to move through the
parameter being edited.
Press the Enter key to accept the changes.
Configuring the COM RS-232D Port
The COM port is for serial data communications. Configuring the
COM RS-232D Port describes how to program the RS-232D serial
port. All COM port settings should be configured at one time.
Select COM from the menu to access the following sub-menus.
Data Rate
Parity
Data Bits