Filter
Top Products
3-32 October 22, 1999 SP Switch Router Adapter Guide - 1.4 Update 2
Monitoring and Management Tools
SP Switch Router logs
cmd=MSGP - command code (MSGP is a print message)
'[RX] Combus_skip: 152 words skipped\r\n' - Message text
The host name indicates which SP Switch Router is logging the message.The media card
address consists of the chassis number (always zero), the slot number, and the interface number
(both in hex). The protocol header fields can be ignored, except that the hwtype field
indicates whether the control board or a media card is issuing the message. The cmd=MSGP
indicates this is a printf to the console, and the printf text follows it in single quotes. The
log interprets control characters in C-language convention (e.g. \r\n for CR/LF).
Sample gr.boot log
When a media card boots, information about its boot status is written to gr.boot. Lines at
Mar 24 show the release of a boot image for the dev1 and other media card receive and
transmit ports. Here is a sample gr.boot log from the SP Switch Router with host name
tester.site.com.
Figure 3-3. Sample entries in the gr.boot log
tester-26 more gr.boot
Mar 23 11:08:38 tester grboot[27388]: Starting up (after openlog)...
Mar 23 11:08:38 tester grboot[27389]: read packet from 0:0x3:0 (cmd=BOOTME)
Mar 23 11:08:38 tester grboot[27389]: grinch dump config (2.12.2.4.7.2.3.3=0x14)
Mar 23 11:08:38 tester grboot[27389]: grinch card death state (2.12.2.4.5.4=0x2)
Mar 23 11:08:38 tester grboot[27389]: sending ACK|BOOTME to 0:0x3:0
Mar 23 11:08:38 tester grboot[27389]: past switch(grid->grid_cmd)
Mar 23 11:08:38 tester grboot[27389]: past receive(); exiting main()
Mar 23 11:08:39 tester grboot[27390]: Starting up (after openlog)...
Mar 23 11:08:39 tester grboot[27391]: read packet from 0:0x3:0 (cmd=LOAD)
Mar 23 11:08:39 tester grboot[27391]: exec /usr/nbin/grload.sh -h HIPPI -p 0:0x3:0 -s 0
Mar 23 11:08:40 tester log2[27398]: grload exec /usr/nbin/grload -p 0:0x3:0 - s 0 -i 3
Mar 24 10:10:24 tester grbootd[208]: boot image ager scheduled for 60s
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/hippi.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/runload.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/hssi_tx.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/dev1_tx.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/ portcards
/dev1_rx.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/hssi_rx.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/fddi.run (age6)
Mar 24 10:11:24 tester grbootd[208]: freeing boot image for /usr/libexec/portcards
/xlxload.run (age 6)
Mar 24 10:11:24 tester grbootd[208]: 1 boot images resident (1 max)