Filter
Top Products
Index
N
SP Switch Router Adapter Guide - 1.4 Update 2 Index-5
for SP Switch Router Adapter card, 3-15
GR > prompt, 3-15
management commands, 3-2
masks, in grifconfig.conf, 2-21
Max Link Pckt Length (MIB parameter),
2-33
media cables
SP adapter card, 2-10
media cards
components, 1-7
determining status, 2-37
face plate screws, 1-8
flash memory burn-in, 3-34
how to replace, 1-7
inserting into chassis, 1-8
list of states, 2-37
minimum installed, 1-7
removal warning, 1-7
resetting, 2-38
status/gr.console log, 3-31
using ping command, 2-36, 2-37
media value (filters), dev1, 1-14
media, types supported, 1-2
memory
upgrading system RAM, GRF 400, 1-5
messages log, 3-33
MIB daemon, mib2d, 1-15, 2-40
MIB, for SP Switch Router Adapter card,
1-15, 2-31
parameter definitions, 2-33
mib2d, 1-15
during card initialization, 2-40
functions performed, 1-17, 1-18
list of MIB objects, 1-15
microcodeLoadFailed state, 1-16
model numbers, 1-3
more command
using to display log file contents, 3-30
mountf command, 3-5
as used with grdump, 2-7
in PCMCIA installation, 2-7
MTU
default for SP adapter card, 1-13
discovery facility, 2-23
other media defaults, 2-23
specifying in grifconfig.conf, 2-23
multiple frames, SP system, 2-15
multiple logical addresses, on one card, C-5
N
NBMA interface in grifconfig.conf, 2-22
netmask, 2-22
in grifconfig.conf, 2-22
MIB parameter in /etc/grdev1.conf, 2-33
netmasks, in SP Switch networks
see Appendix C
netstat commands, usage and examples, 3-8
Node Delay (MIB parameter), 2-34
node number
corresponding SP Switch port, 2-12
differentiating multiple frames, 2-15
obtaining from SP control workstation,
2-14
required by SP system, 2-12
node number address space, 1-3
Node State (MIB parameter), 2-34
normal operations, LED ac tivity, 1-11
notConfigured state, 1-16
NOT-RESPONDING, state of, 2-37
O
on/off power switch, 1-4
operating system, messages log, 3-33
/out.top file, using, 2-13, 2-14
P
packet
destination path (traceroute), 3-7
headers printed by tcpdump, 3-7
MTU and fragmentation, 2-23
PANIC, state of, 2-37
part numbers, list of IBM and Lucent
see Appendix A
partition, connecting to SP, C-2
PCMCIA 520MB disk
as shipped with SP Switch Router, 1-4
PCMCIA config command (csconfig), 3-2
ping command, 2-36, 2-37
testing link to SP node, 3-6
point-to-multipoint, card to SP, 2-22
port number, SP Switch
as configuration requirement, 2-3
configuration with multiple frames, 2-15
power consumption, per card, 1-13
power on, 1-4
plug-in, no power switch, 1-4