Filter
Top Products
Log Messages
Message descriptions
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 B-3
Message descriptions
For each message described, related information to the message is also included to aid in
analysis and interpretation:
– LOG_FILE provides the name of the file where the message text is written
– SOURCE_FILE specifies the software module that generates the message
– SCOPE specifies the scope of the message, either CARD (media card) or RMS
(management software)
– CONTEXT specifies the state of the SP Switch Router Adapter card:
INIT = initialization phase
BIST = Built-In-Self-Test phase
RUNNING = operational phase
– SEVERITY specifies the severity of the message: INFO, WARNING, ERROR, or
FATAL
– DESCRIPTION provides additional information (when, why, how) about the
message.
References to “IOSTB3” should be read as the SP Switch Router Adapter card, dev1.
“Access FIFO Sync Error from RC, int1=%d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when the RX-CPU detects that the CPU and the
RC are out-of-synch. This is a fatal error. The card is reset and automatically reloaded.
int1 is the content of the RC’s interrupt register.
“Access FIFO Sync Error from TC, int1=%d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when the TX-CPU detects that the CPU and the
TC are out-of-synch. This is a fatal error. The card is reset and automatically reloaded.
int1 is the content of the TC’s interrupt register.
“ACK WORDS: 0x%08x, 0x%08x, 0x%08x, 0x%08x, 0x%08x, 0x%08x”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD