Filter
Top Products
Monitoring and Management Tools
Using the netstat command
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 3-9
dependent node for this SP Switch Router Adapter will be specified in the Gateway column.
This is the address to which packets for the destination network will be sent when they enter
the SP Switch Router from external networks or from other SP Switch Router Adapter
networks. This is how you display the route paths that have been built for packets destined for
or sent from the SP system.
netstat -rs
Using both the -r and -s options, netstat prints routing statistics:
% netstat -rs
routing:
0 bad routing redirects
0 dynamically created routes
0 new gateways due to redirects
44 destinations found unreachable
0 uses of a wildcard route
netstat -in
Here is an example of output from netstat -in with interface information. Interface gt020 is
the SP Switch Router Adapter card from slot 2:
# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
de0 1500 <link1> 00:c0:80:0b:30:53 492665 0 8099 0 2584
de0 1500 198.174.11 198.174.11.249 492665 0 8099 0 2584
rmb0 596 <link2> 00:00:00:00:00:00 130022 0 129726 0 0
rmb0 596 <GRIT> 0:0x40:0 130022 0 129726 0 0
lo0 1536 <link3> 496 0 496 0 0
lo0 1536 <GRIT> 0:0x48:0 496 0 496 0 0
gl000* 1524 <link4> 0 0 0 0 0
gh010* 65280 <link11> 0 0 0 0 0
gt020 65520 <link5> 0 0 0 0 0
gt020 65520 206.146.162 206.146.162.67 0 0 0 0 0
gf080 4352 <link7> 00:c0:80:00:04:db 0 0 0 0 0
gf080 4352 206.146.162 206.146.162.129 0 0 0 0 0
gf081* 4352 <link8> 00:c0:80:00:04:dc 0 0 0 0 0
gf082* 4352 <link9> 00:c0:80:00:04:dd 0 0 0 0 0
gf083* 4352 <link10> 00:c0:80:00:04:de 0 0 0 0 0
gs0b0* 4352 <link6> 0 0 0 0 0