Filter
Top Products
3-16 October 22, 1999 SP Switch Router Adapter Guide - 1.4 Update 2
Monitoring and Management Tools
SP Switch Router Adapter card maint commands
Sample maint commands
The next pages show examples of maint commands you may find useful.
Find hardware and software version numbers - maint 2
The maint 2 command returns the system software version and the card’s receive side (rx)
binary version:
GR 0> maint 2
[RX]
[RX] DEV1 Port Card Hardware and Software Revisions:
[RX] ===============================================
[RX]
[RX] HW:
[RX] Power-On Self-Test (POST) result code: 0x0.
[RX] DEV1 Media Board HW Rev: 0x6, with 4M Sram.
[RX] DEV1 Xilinx Version: 0x0.
[RX] SDC Board HW Rev: 0x9 (SDC2).
[RX] SDC2 Combus Xilinx version: 0x6.
[RX] SDC2 Switch Transmit Xilinx version: 0x5.
[RX] SDC2 Switch Receive Xilinx version: 0x8.
[RX] SW:
[RX] DEV1 Code Version: A1_4_20,Compiled Mon Aug 30 15:20:26 CDT
[RX] 1999,in directory: /nit/A1_4_20/dev1/rx.
[RX] IF Library Version: 1.1.0.0, Compiled on Mon Aug 30
[RX] 15:16:07 CDT 1999.
Find transmit (tx) binary version - maint 102
The maint 102 command returns the card’s transmit side (tx) binary version:
GR 0> maint 102
[TX]
[TX] Code Version: A1_4_20
[TX] Compiled in: /nit/A1_4_20/dev1/tx,
[TX] on: Mon Aug 30 15:21:35 CDT 1999.
Display configuration and status - maint 3
Use maint 3 to display internal SP Switch Router Adapter card configuration parameters. All
of the reported values relate to the SP Switch Router Adapter card, they do not reflect the SP
Switch.
GR 07> maint 3
[RX] Configuration Parameters:
[RX] Slot Number..........: 7
[RX] Node Number..........: 9
[RX] Node Name............: 07
[RX] SW Token.............: 0001000600
[RX] Arp Enabled..........: 1
[RX] SW Node Number.......: 2
[RX] IP...................: 0xce92a243
[RX] IP Mask..............: 0xffffffc0
[RX] Alias IP.............: 0x0
[RX] Max Link Size........: 1024