Filter
Top Products
Index-4 SP Switch Router Adapter Guide - 1.4 Update 2
Index
K
ibmSPDepNode MIB, 1-15
list of MIB objects, 1-15
ibmSPDepNodeDelay, definition, 2-34
ibmSPDepNodeName, definition, 2-33
ibmSPDepNodeState, definition, 2-34
ibmSPDepNodeTable entries, 1-17
ibmSPDepSwARP, definition, 2-33
ibmSPDepSwChipLink, definition, 2-34
ibmSPDepSwNodeNumber, definition, 2-33
ibmSPDepSwToken, definition, 2-33
ibmSPDepSysName, definition, 2-34
ICMP settings, 2-24
ifconfig command
network example, C-5
iflash command
as used in spinning disk installation, 2-7
inserting media cards, 1-7, 1-8
inserting the SP Switch Router Adapter card,
1-7
installation checkout
determining state of media card, 2-37
pinging boards, 2-36
pinging to switch node, 2-37
resetting media cards, 2-38
installation, SP Switch Router to SP system
location of related information, 2-3
overview and list of tasks, 2-5
pre-installation assumptions, 2-3
installing configuration files, 2-35
interface name
how to create, 2-22
interfaces
IP address, netmask, 2-21
per SP Switch Router Adapter card, 1-6
Internet address, 2-22
introduction, to card, 1-1
IP address
for SP Switch Router Adapter card, 2-16
for SP Switch Router Adapter interface,
2-21
in grifconfig.conf, 2-22
MIB parameter in /etc/grdev1.conf, 2-33
IP addressing, on SP networks
see Appendix C
IP Host Offset (MIB parameter), 2-33
IP packet filtering, 1-14
IP statistics, grstat, 3-12
K
keep-count field, Dump profile, 2-26, 2-28
L
layer 2 and 3 stats, 3-5, 3-12
layer 2 stats, 3-17
LEDs
"heartbeat" pattern, 1-11
brightness indicates traffic level, 1-12
during boot, 1-9
during normal operations, 1-11
LEDs, on SP Switch Router Adapter card,
1-9
LEDs, SP Switch Router Adapter card
checking for error status, 2-41
link and interface status, netstat -in, 3-9
load profile
change run-time code, 2-27
LOADING, state of, 2-37
log files, 2-6
log messages
explanations of messages, Appendix B
logging
configuring on PCMCIA disk, 2-6
files to edit, 2-6
via PCMCIA 520MB disk, 1-4
logging, specify log directory, 2-8
log/gr.boot
media card boot info, output from, 3-32
log/gr.console
media card status, output from, 3-31
log/messages
system messages, output from, 3-33
logs
collect data via grdinfo, 3-24
collecting via grdinfo, 3-25
how to access a log file, 3-30
those needed by customer support, 3-30
/var/log/gr.boot, 3-32
/var/log/gr.console, 3-31
/var/log/messages, 3-33
M
machine code
IBM license agreement, D-2
upgrading, D-1
maint command set
collect output via grdinfo, 3-25
maint commands