ix
Safety Instructions
Important Safety Instructions —SAVE THESE INSTRUCTIONS
To reduce the risk of fire, electrical shock, and injury to persons, follow these basic
safety precautions when installing telephone equipment:
• Read and understand all instructions.
• Follow all warnings and instructions marked on or packed with the product.
• Never install telephone wiring during a lightning storm.
• Never install a telephone jack in a wet location unless the jack is specifically
designed for wet locations.
• Never touch uninsulated telephone wires or terminals unless the telephone wiring
has been disconnected at the network interface.
• Use only Lucent Technologies-manufactured MERLIN MAGIX™ Integrated System
circuit modules, carrier assemblies, and power units in the MERLIN MAGIX
Integrated System control unit.
• Use only Lucent Technologies-recommended or approved MERLIN MAGIX
Integrated System accessories.
• Do not install this product near water—for example, in a wet basement location.
• Do not overload wall outlets, as this can result in the risk of fire or electrical shock.
• The MERLIN MAGIX Integrated System requires a supplementary ground
.
• Slots and openings in the module housings are provided for ventilation. To protect
this equipment from overheating, do not block these openings.
• Never push objects of any kind into this product through module openings or
expansion slots, as they may touch dangerous voltage points or short out parts,
which could result in a risk of fire or electrical shock. Never spill liquid of any kind
on this product.
• Unplug the product from the wall outlet before cleaning. Use a damp cloth for
cleaning. Do not use cleaners or aerosol cleaners.
• Do not operate telephones if chemical gas leakage is suspected in the area. Use
telephones located in some other safe area to report the trouble.