Filter
Top Products
Installation3
Lucent Technologies Model 3000 UPS Operator's Manual (167Ć405Ć119 Issue 3)
26
4 Slide the cover over the stacked modules and secure with four of the
1/4Ć20 x 1/2 screws provided. Tighten the screws until the cover's flanges
are pulled flat against the caster base.
5 Make sure the Bypass switch on the Bypass Module rear panel is in the
NORMAL position (see Figure 5 or Figure 6).
BDM (60 Hz)
427.79 mm
(16.84I)
251.6 mm
(9.91I)
Depth of Unit:
400.0 mm (15.75I)
Power Output
Receptacles
Utility Input
Connector
UPS Module
Breaker Tie
Circuit Breaker
Battery Module
External
Battery
Connector
Battery Cord
Bypass Switch
Load Circuit
Protectors
Input Circuit
Protector
Battery
Connector
Power Output
Receptacle
Power Input
Connector
Serial Port
YĆCord
Tie Wrap
Mounts
REPO
Receptacle
Figure 5. UPS with BDM Rear Panel