Filter
Top Products
Installation 3
Lucent Technologies Model 3000 UPS Operator's Manual (167Ć405Ć119 Issue 3)
35
Troubleshooting Tips
If you should encounter any problems during startup, see the troubleshooting chart
on page 57.
The battery modules are shipped with the batteries charged. However, batteries may
lose some of the charge during shipping and storage. You can use the UPS
immediately after unpacking, but it may not provide the fullĆrated backup time
during a power failure. Upon initial startup, the UPS may need to operate for
approximately 8 hours before the battery is fully charged and full batteryĆbackup
time is available. If the I3 Indicator flashes, operate the UPS for 24 hours to fully
charge the battery.