Marantz Model VP-10S1 Projector User Manual


 
15
ENGLISH
When making connections be sure to:
Turn off the projector and any connected equipment before making any connections.
Use the proper cables for each connection. See the instruction manual of each connected device.
Securely insert the plug into the jack to connect cables. Loose connections can lead to trouble.
When disconnecting cables:
Grab the plug and not the cable itself. Pulling on the cable can damage the cable and cause incomplete connections later on.
Connect the included AC power cable to the AC IN socket on
the projector rear and plug the other end into an electrical
outlet (100-120/220-240V AC, 50/60 Hz, 5 A or more).
Keep the ON/OFF switch in the off position until all devices
have been connected.
Note :
Check the AC power cable is securely inserted into the
AC IN socket on the projector rear.
Before connecting the AC power cable, attach a grounding
wire to the plug end. Before detaching the grounding wire,
always unplug the AC power cable from its electrical outlet.
This projector can connect to VCR, DVD player and other type of video equipment.
Connecting a video equipment to the S-VIDEO IN and VIDEO IN jacks
1. Connect one end of an S-video cable to the S-VIDEO IN jack on the projector rear. Similarly, connect one end of a video cable
to the VIDEO IN jack on the projector rear.
2. Connect the other end of the S-video cable to the S-video output jack on the VCR. Similarly, connect the other end of the
video cable to the video output jack on the VCR.
Connecting a DVD player to the COMPONENT VIDEO IN 1 or 2 jack
(Devices can be connected to both terminals at the same time.)
1. Connect the pin-jacks on one end of the component video cable to the COMPONENT VIDEO IN 1 or 2 jack on the projector rear.
2. Connect the pin-jacks on the other end of the cable to the corresponding jacks on the DVD player.
FL OFF
STANDBY
FL OFF
STANDBY
RS-232CDVI-D INRGB IN
EXT.INT.
IN
OUT
OFF ON
1
2
TRIG. LIGHT
REMOTE
VIDEO IN
S-VIDEO IN COMPONENT VIDEO IN 1 COMPONENT VIDEO IN 2
YP
B
/C
B
P
R
/C
R
YP
B
/C
B
P
R
/C
R
S-VIDEO OUT
VIDEO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Connecting to Video Equipment
Connecting the AC Power Cable
CONNECTIONS
Component cable
(commercially available)
DVD
VCR
S-video cable (commercially available)
Video cable (commercially available)
DVD
Component cable
(commercially available)