Filter
Top Products
35
ENGLISH
❖ Lamp Life
Pressing the INFO. button on the remote controller displays the below message on the screen.
The remaining lamp life appears on the second from last line.
Note:
• The lamp lasts a maximum of 1,500 hours. Although every possible effort has gone into quality, the lamp can – though rarely -
burn out after 1,000 hours of lighting. Therefore, it is recommended to replace the lamp promptly when lamp life falls under 500
hours. The lamp must not be used in excess of the maximum lamp life.
• This product is subjected to strict quality controls before shipping from the factory. The “Total Hours” item on the Information
screen includes this checking time, therefore the “Total Hours” may not be “0” when the projector is used for the first time.
– When remaining lamp life drops below 100 hours and the projector is on, the below message with the remaining lamp life
appears on the screen.
– When remaining lamp life drops below 5 hours, the below message appears on the screen.
Press the MENU button to clear the message from
the screen.
– Approximately 2 minutes after the lamp reaches the end of its life, power to the projector shuts off and the WARNING indicator
lights up red. If the below message appeared on the screen before power shut off, promptly replace the lamp with a new one.
(See “Lamp Unit Replacement”
☞
pg. 36.)
LampLife 0 Hours
Warning
PAT T.
MENU V-MUTE
ENTER
PATTERN
STANDBY POWER ON
PATTERN
ENTER
INPUT
MENU
POWER
STANDBY
ON
Warning
LampLife 5 Hours
Warning
LampLife 100 Hours
S-VIDEO
VIDEO
RGB
AUX
DYNA.
USER
CINEMA
ZOOM
THROUGH
INFO
LIGHT
Video Input
Information
Component-1080i
Preset User A1
Cinema Mode Auto
Aspect Full
Trigger 2 On
Lamp Life 927 Hours
Total Hours 3653 Hours
Lamp Life and Replacement
MAINTENANCE