Filter
Top Products
26
ENGLISH
You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory.
This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode.
❖ For a video signal input, the following adjustments can be made.
Note:
• Some menu items cannot be adjusted depending on the input signal.
• If default is selected as the index, picture quality cannot be adjusted. To adjust picture quality, select an index from 1 to 3.
See “Preset” (
☞
pg. 34)
❖ Contrast
❖ Color Temp. (Color Temperature)
1 : Red comes out strong. Color temperature is about 5250 K.
2 : Red is mildly strong. Color temperature is about 5800 K.
3 : Normal. Color temperature is about 6500 K.
4 : Blue is mildly strong. Color temperature is about 7500 K.
5 : Blue comes out strong. Color temperature is about 9300 K.
❖ Adjusting Picture Quality
1. Select the desired menu item and press the 2 button. An adjustment bar appears on the screen.
2. Use the 1 and 2 buttons to adjust the item.
3. Press the 3 button to enter the setting and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
3.
1, 2
INPUTPATTERN
ENTER
3.
1, 2
Color Temp. 2
Contrast 50
Picture Adjust
Menu Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu
50
44
58
7
0
0
3
Picture Adjust
Menu item
Contrast
Brightness
Color
Sharpness
Tint
Noise Reduction
Color Temp. (Color Temperature)
Adjustment range
0 100
Weak Strong
0 100
Dark Bright
0 100
Light Deep
031
Soft Sharp
R50 G50
Purple Green
063
Weak Strong
12345
Red Blue