Marantz Model VP-10S1 Projector User Manual


 
6
ENGLISH
- High Picture Quality Technology -
DLP
TM
technology to deliver a high
contrast ratio (3600:1)
Incorporates three HD2 DMD
TM
elements (1280 x 720
pixel, 16:9 wide panel) to distinctly reproduce R/G/B
colors. Using an optimized system for movie viewing with
the below image circuit and optical parts, the VP-10S1
brings high color reproduction and rich tones that balance
pitch black with bright white to images.
Built-in image processing IC by Faroudja
to project high quality video images
Images are sharply detailed, smooth and high quality
owing to a powerful 3-chip set that builds into a dedicated
processor an image processing IC featuring Faroudja’s
proud “DCDi
TM
” high quality contouring technology, “high
performance adaptive IP conversion” and “2-3 pull-down
capabilities”.
- Wide Array of Features -
Motorized zoom, focus and vertical /
horizontal lens shift
Using the included remote controller or by operating
buttons on the projector, the user can zoom in/out, focus
the image, and vertically and horizontally shift the lens.
Automatic color temperature adjustment
Using the included color temperature sensor, the VP-
10S1 automatically adjusts color temperature after lamp
changes or as lighting changes over time.
Image quality adjustment capabilities for
making images as one prefers
4 picture modes to select as demanded by the listening /
viewing environment and image source (Theater, Standard,
Dynamic and User)
Fine-adjustment menus that allow the user to adjust images
as they like
12 user memory for saving adjusted images
Color temperature setting (5250K, 5800K, 6500K, 7500K,
9300K)
Black level adjustment (0 IRE, 7.5 IRE/ EXPAND, NORMAL
[For DVI-D input])
- Create a Comfortable Home Theater
Environment -
Versatile input support including high-
vision satellite broadcast
Supports input of NTSC, PAL, SECAM and high-vision
satellite broadcasts (480i, 480p, 720p, 1035i, 1080i).
Rich array of input jacks including HDCP supported DVI-D
digital input jack and dual system component jacks
Easy to install and operate
Motorized lens shift feature for vertically and horizontally
positioning the projection point
Digital correction of horizontal-vertical keystone distortion
Projection modes for ceiling-mount projection and rear
projection
Light-up luminous remote control
Light-up I/O jacks for easy connections and setup in dark
environments
Equipped with RS-232C port and 12V trigger terminal for
custom installation
Marantz system bus port
Designed for silence and safety
Low operating noise thanks to double-shielded construction
and fan speed control
Highly rigid to minimize radiating noise
1,500 hr long-life 250W P-VIP lamp
DLP, Digital Micromirror Device and DMD are trademarks
of Texas Instruments.
“DCDi” is a trademark of Faroudja. Faroudja is a wing of
Genesis Microchip Inc.
The DVI logo is a trademark of the DDWG (Digital Display
Working Group).
All trademarked product names mentioned in this manual
are the property of their respective companies.
FEATURES