Filter
Top Products
When returning the wireless display to its condition at the time of shipment
Perform the following procedure while the wireless display is turned off.
A Connect your wireless display to a power outlet.
B Press the power button with the keyboard button and USER button
pressed until the message “Reset the device to factory default...” appears.
When the [Enter Password] screen appears, enter the Supervisor Pass-
word and tap [OK].
C Select [Yes].
NOTENOTE
When you turn on the wireless display next time, the calibration screen will
appear.
1 Press the power button for one or two seconds until the
message “Preparing to Power off…” appears.
When shutting down forcefully, press the power button for four seconds
or longer.
Shutting Down (power off the wireless display)
4-3