Filter
Top Products
OCCURRENCE OF
TROUBLE
END OF
REPAIR WORK
Self Test Program
NORMAL FINISH
ERROR
OCCURRENCE
TROUBLESHOOTING
DISASSEMBLY PROCEDURE
Replace defective parts.
Self Test Program
After repair, make sure that the repaired
set operates properly.
TEST OK
DEFECTIVE PARTS
SORTING
REPAIR WORK
INSPECTION
OK
FAULT
Insert the AC plug.
Press the Power button,
while pressing the USER button
and the Cursor control button
at the same time.
Self Test Program start up.
5.1. Basic Procedures
The basic procedures for diagnosis, disassembly, and test of defective parts of a set to be repaired are summarized below.
For details, refer to relevant pages in the Service Manual.
Flow Chart
5 Diagnosis & Repair
5-1