Filter
Top Products
Shut Down
Sound
Wireless Communication
Connecting Peripherals
Cannot shut down. Press the power button for four seconds or longer to
shut down the wireless display.
No sound. Confirm the volume for [Quick Menu] or [Volume &
Sounds] in Control Panel.
Unable to hear
sound in stereo.
Playback conditions vary depending on the server.
• If you are connecting through Microsoft
®
Remote
Desktop Connection or a web server, you will hear
monaural sound even if the original sound is stereo.
• For playback conditions when connecting through Cit-
rix
®
Presentation Server 4.0, refer to the Citrix man-
ual for details.
Cannot connect to
network.
Check the network settings.
You may experience interference with other wireless
LAN access points.
Verify that each wireless LAN access point is set to a
different channel.
The connected key-
board and mouse
do not work.
Check the keyboard and mouse connection.
The device con-
nected to the serial
port does not work.
Check the connection.
The device driver may not work. Refer to the instruction
manual of the device.
Do not connect two mouse devices simultaneously.
Cannot print. Check the printer connection.
Turn on the printer.
The printer is not online.
No paper is in the printer tray or there is a paper jam.
Turn on the printer and connect it to the wireless dis-
play, and then turn on the wireless display.
Others
No response. The screen content may not display correctly due to
poor signal quality. In such case, move to a place where
signal quality is good then make a connection.
Press the power button for four seconds or longer to
shut down the wireless display, and then press the
power button to turn it on.
6-2