Filter
Top Products
9-1
9 Disassembly/Reassembly
Note:
Power off the computer. Do not shut down to the Suspend or hibernation mode.
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.
9.1. Disassembly Instructions
9.1.1. Preparation
Be sure to make the following preparations before disassem-
bling.
• Shut down Windows and turn off the power.
• Disconnect the AC adaptor.
• Remove other devices if they are connected.
Attention:
• Please execute writing BIOS ID when you exchange the
Main Board.
• Parts (Sheet and rubber) etc. related various the Conductive
Cloth and Heat Spreader cannot be recycled. Use new parts.
9.1.2. Removing the Battery Pack
1. Open the hand strap cover.
2. Remove the hand strap.
3. Slide the Battery cover latch.
4. Open and remove the Battery cover.
5. Pull the tab of the Battery Pack and remove it from the
wireless display.
6. Attach the hand strap.
7. Close the hand strap cover.
9.1.3. Removing the Display Unit
1. Remove the two Screws <N4> and the Antenna Cover L.
2. Remove the two Screws <N4> and the Antenna Cover R.
hand strap cover
hand strap
battery cover latch
battery cover
battery pack
wireless display
hand strap
hand strap cover
Antenna
Cover L
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N6>
<N4>
<N4>
<N4>
Rear Cabinet
<N4>
<N6>
<N6>
Antenna
Cover R