Filter
Top Products
mixer sample rate from being set too low and therefore lowering its frequency
response. Select a sample rate in the "CODEC Sample Rate" group to use as
this idle sample rate. Choose a 44.1kHz or higher setting for best results, and
select the same sample rate you will be using in your application if possible.
We’ve chosen 48,000kHz for this example.
Now click on the Delta Control Panel’s "Patchbay/Router" tab. In the first column of the
Patchbay/Router page, click the radio button "Monitor Mixer" to connect the monitor
mixer’s stereo output directly to Delta analog outputs OUT1 and OUT2. Now, everything
that we hear at outputs 1 & 2 will reflect our settings in the Monitor Mixer page.
Select the "Monitor Mixer" tab of the Delta Control Panel. The default Master Volume
fader settings are 0dB and unmuted, and all other faders are set to full attenuation
(-144dB) and muted. We will need to adjust these to our preference. The screen capture
on the next page shows the settings that we wish to achieve.
41