Filter
Top Products
McDATA 4314 Fibre Channel Switch Module Installation Guide
3-6
Installing a Switch
3. Open a Telnet session by entering the following command with the switch
IP address. The default IP address is 10.0.0.1
telnet 10.0.0.1
4. Log in to the switch. The default account name and password are (admin,
password).
Switch Login: admin
Password: ********
Install EFCM BASIC
You can install EFCM BASIC on a Windows or Linux workstation. To install
the EFCM BASIC application, do the following:
For a Windows platform:
1. Close all programs currently running, and insert the EFCM BASIC
Installation Disk into the management workstation CD-ROM drive.
2. In the upper left corner of the product introduction screen, click
Management Software.
3. Locate your platform in the table and click Install.
If the product introduction screen does not open in step 2, open the CD with
Windows Explorer and run the installation program with the following path:
data\files\Management_Software\Windows\Windows_5.02.x.xx.exe
For a Linux platform:
Open the CD and run the installation program with the following path:
data/files/Management_Software/Linux/Linux_5.02.xx.xx.bin
If there is no CD-ROM icon, do the following:
1. Open an xterm or other terminal window.
2. Mount the CD-ROM. From a shell prompt, enter the following:
mount /mnt/cdrom
3. Change directory to the location of the install program:
cd /mnt/cdrom/data/files/Management_Software/Linux