Filter
Top Products
18
Remote Control Push-Buttons
Changes the film frame pro-
cessing from Auto to Off
Used to change the
Gamma settings
Press to adjust the
selected function
Selects which component, either the
VP1000 Processor or the MDLP2
Projector, the remote control com-
mands are sent to
Note: Push-buttons whose function is not identified above
are for use with other McIntosh Components
LED illuminates during the time
a remote command is sent to the
MDLP2
Used to navigate up, down, to
the left and to the right through
the various menus. Also used
to select the desired function or
option
Press to recall various
On-Screen Information,
press a second time to
deactivate the Menus
Press to change the Aspect
Ratio of the video image
Press to activate the various On-
Screen Menus, press a second time
to deactivate the Menus
Press to Power ON or
OFF the MDLP2
Used to change the Color
Temperature settings
Used to change the Lens Iris
opening size
Press to select one of three
predefined picture settings
or select one of nine user
defined picture settings
Activates the OnScreen
Crosshatch Test Pattern
Press to select the desired video
source, Component 1, Compo-
nent 2, HDMI 1 or HDMI 2
Press to select the desired Screen
Blanking Setting from Memory
Locations 1-3 or switch Off the
Blanking Function