McIntosh MDLP2 Projector User Manual


 
30
Specifications
Optical Specifications
Digital Micromirror Device
0.95 inch (16:9)
1920 x 1080 pixels
Lamp
Super High Pressure 200W DC
Lens
f: 30.7 – 44.5mm (medium throw lens)
f: 44.5 – 66.75mm (long throw lens)
F: F3.0/F6.0
Projected Image Size
70 to 250 inches (medium throw lens, 1.77:1 aspect ratio)
80 to 300 inches (long throw lens, 1.77:1 aspect ratio)
70 to 250 inches (medium throw lens, 1.33:1 aspect ratio)
60 to 300 inches (long throw lens, 1.33:1 aspect ratio)
Electrical Specifications
General Specifications
Operating Temperature
41 to 95
o
F
5 to 35
o
C
Operating Humidity
30 to 85%
Overall Dimensions
Width is 20-1/4 inches (51.44cm)
Height is 6- 3/4 inches (17.15cm) feet retracted
Height is 9- 1/2 inches (24.13cm) feet extended
Depth is 18- 13/16 inches (47.78cm) medium throw lens
Depth is 19- 1/16 inches (48.41cm) long throw lens
Weight
40 pounds (18.14 kg) net, 54 pounds (24.5 kg) in shipping
carton
Shipping Carton Dimensions
Width is 32 inches (81.28cm)
Depth is 28 inches (71.12cm)
Height is 13 inches (33.02cm)
Video Inputs
2 - Component Analog Video (Y, Pb, Pr)
2 - HDMI Digital Video (1.3 Compliant)
McIntosh Data Control Input
1- 1/8 inch Stereo Mini Jack
Power Control In
1 - 1/8” Stereo Mini Jack
Input voltage range 5V – 12V
Power Control Out
1- 1/8” Stereo Mini Jack
Output voltage 5V
Trigger Outputs
2- 1/8” Stereo Mini Jacks
Output Voltage 0V or 12VDC
Data Communications
Standard RS-232C
9pin D-Subminature female receptacle
Power Requirements
100 Volts, 50/60Hz at 350 watts
110 Volts, 50/60Hz at 350 watts
120 Volts, 50/60Hz at 350 watts
220 Volts, 50/60Hz at 350 watts
230 Volts, 50/60Hz at 350 watts
240 Volts, 50/60Hz at 350 watts
Note: Refer to the rear panel of the MDLP2 for the correct
voltage.