Filter
Top Products
9
A Indicator
Please refer to ‘Indicators’ (Page 12) for details.
B Air Inlets
(2 in front and 1 at bottom surface)
The air inlets absorb air to cool the interior of
the unit. Do not block or allow warm air to
blow into them. This may cause the unit to
malfunction.
C Power Zoom Lens
1.9x ‘normal’ power zoom lens
(model DILA1080MF1)
1.4x ‘short-throw’ power zoom lens
(model DILA1080MF1S)
• Before projection, remove the lens cap.
D Remote Sensor (Front)
When operating with the remote control, aim
it towards the sensor. (Also see page 14)
• A remote sensor is also located on the rear of
the unit.
E Lens Cap
• Fit the cap on the lens when this unit is not in
use.
F Lens Shift Cover
Remove this cover when using the Lens Shift
feature for shifting the projecting position in
the vertical direction.
G Foot
It is set at the lowest position when shipped
from the factory. This unit does not come with
a function to adjust the gradient.
H Filter
Cleans air drawn in from the air inlet. Please
clean this filter regularly. (Page 30)
Controls & Features
Front, top and underside
A
B
F
B
C
D
E
G
H
G
Underside