Filter
Top Products
Installation and User Manual
3.5 Mimic Diagrams
The Mimic Diagrams screen is unlike any of the other
screens we have examined. This screen is actually two
screens in one. The top half of the screen contains a
single line representation of the current operating
condition of the Galaxy 4000 unit. Through the use of
color changes in the screen, it will indicate whether the
unit is operating normally, is on bypass, or is currently
running on batteries. Segments are green when the
function is active, orange when not active, and red
when a fault has occurred. See Figure 3-12.
The lower half of the screen will show any existing
alarm conditions.
Soft Keys
1 & 2 Soft keys are now programmed to allow the
user to scroll up and down through the list. See
Figure 3-12.
3 To delete a specific alarm message.
4 To further examine a specific alarm message.
The detail key (#4) must be held down to examine the
message details. To exit this display, it is necessary to
press the Main Menu key.
3.6 Status Screen
Selecting the Status option from the Main Menu provides
the following screen selections: Status and Alarms, Event
log, Statistics, and History. See Figure 3-13.
Status and Alarms
Provides the user with the present list of alarms and
warnings.
Event Log
Provides the user with the history of events with date
and time stamp.
Statistics
Provides total time:
- on battery power.
- on AC Bypass (AC BP).
- on UPS (AC N or battery).
- with battery temperature (TBatt) >25°C.
History
Provides history after 60 days for:
- battery capacity.
- backup time.
- % of load.
Display Panel 3 — 786-173010-00 A00
Figure 3-12: Mimic Diagrams screen.
Figure 3-13: Status screen.
Select type of list
Status and Alarms
Event log
Statistics
History
NORM Load Protected
D
E
L
?
23 4
1
(
(