Filter
Top Products
1. Getting Started
Quick Start Guide
The following instructions will help you quickly install and configure your AmpMeter PDU for use on your
network. For detailed information on each step, go to the page number listed to the right.
For your network security, MGE UPS SYSTEMS strongly recommends the removal of the predefined
user account prior to attachment to your network.
1. Mount the AmpMeter PDU..................................................................................................................... 6
2. Connect to the power source................................................................................................................. 3
3. Connect the devices to the AmpMeter PDU.......................................................................................... 7
4. Connect to the AmpMeter PDU ............................................................................................................. 8
5. Configure the AmpMeter PDU (remote monitoring units only) .............................................................. 8
• Login as the predefined Administrator (MGEUPS/MGEUPS) ..................................................... 10
• Create new administrative user account ............................................................................... 14, 22
• Configure location and tower names..................................................................................... 12, 26
• Remove the predefined Administrator................................................................................... 14, 22
6. Connect the AmpMeter PDU to the network
Page 4 - 301-0399-3 Rev B.