Filter
Top Products
Installation and User Manual
Figures (continued)
figure description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
3-1: Initial Startup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 1
3-2: Control Panel with scroll up and down buttons. . . . . . . . . . . . . . . . . . . .3 — 2
3-3: Configuration used to provide full redundancy (2N) to critical loads. . . .3 — 3
3-4: Normal (double conversion) mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 5
3-5: ECO mode display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 6
3-6: Transfer, Threshold and End of backup time. . . . . . . . . . . . . . . . . . . . . .3 — 7
3-7: Shutdown display, circuit breaker, and AC source switch. . . . . . . . . . . .3 — 8
4-1: Disconnecting the power module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 4
4-2: Reconnect the power module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 5
4-3: Rear view of the battery module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 — 6
5-1: Power supplied as a function of input voltage (left), and
Permissible UPS overloads as a function of time (right). . . . . . . . . . . . . .5— 1
Tables
table description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
1: EX RT Model Descriptions and Contents . . . . . . . . . . . . . . . . . . . . . . . .1 — 2
2: Optional Accessories (See section 1.5 for description) . . . . . . . . . . . . .1 — 3
3: Power Module Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 4
4: Battery Module Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 4
5: Battery backup time chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 — 12
3-1: Local Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 3
3-2: Output features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 3
3-3: ON/OFF features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 4
3-4: Battery features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 — 4
4-1: Network and Industrial Modes of Operation. . . . . . . . . . . . . . . . . . . . . . .4 — 1
4-2: Troubleshooting not requiring MGE after-sales support. . . . . . . . . . . . . .4 — 2
4-3: Troubleshooting requiring MGE after-sales support. . . . . . . . . . . . . . . . .4 — 3
5-1: EX 5/7/11 RT Input and Output Characteristics. . . . . . . . . . . . . . . . . . . .5 — 1
5-2: Back-up Time ( in minutes). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 1
5-3: Battery Recharge time to recover 90% of the rated backup time
after discharge at full load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 2
5-4: Full load heat rejection in BTU’s/hr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 — 2
Contents c v86-86000-00 A01