MGE UPS Systems EX 5RT Power Supply User Manual


 
Introduction
1.0 Scope
Thank you for selecting an MGE UPS SYSTEMS, INC. (MGE) product to protect your electrical equipment.
The product you selected is a part of the EX RT series. The EX RT series is a family of Uninterruptible Power Supply
(UPS) designed to provide safe, and reliable AC power backup for sensitive electrical equipment. To discover the
entire range of MGE products, we invite you to visit our website at www.mgeups.com or contact your representative
at (800) 523-0142.
This manual describes the installation and operation of standard HV EX 5/7/11RT systems within the EX RT product
family. For a complete description of the EX RT product family and its available options, please refer to the tables
below:
1 Introduction
Introduction is a general description of system configurations of the EX 5/7/11 RT, and its mechanical
,electrical characteristics. Additionally there is an optional accessories section with important information on MGE
products that will enhance the performance of the EX 5/7/11RT. Please contact your MGE representative for
detailed information on these options.
2 Setup and Installation
Setup and Installation guides the user through tools and equipment required for connecting the EX 5/7/11 RT and
battery installation or replacement. Included are assembly instructions, power cable connections with wire diagrams
for configuring the product to hardware specifications.
3 Operation
Operation describes the EX 5/7/11RT system characteristics of indicators and controls, modes and specifications.
The user procedures include performing software programming that will maintain optimal performance.
4 Maintenance
Maintenance includes a troubleshooting guide of symptoms and possible solutions, hot swapping the power module,
battery module, and testing scenarios.
5 Appendix
Electrical and Mechanical specifications for the EX 5/7/11 RT.
A Glossary provides definitions of abbreviations and terms used in this manual.
1 — 186-86000-00 A01 Introduction