Filter
Top Products
- 12 -
5
USING THE CAMERA
You can access and manage the camera through your web browser. This chapter
describes the Web Configuration Utility and provides the instructions on using the
camera with a web browser.
5.1. Web Configuration Utility
The camera must be configured through its built-in Web-based Configuration.
Whenever you want to configure the camera, open your web browser (e.g.
Internet Explorer in this manual), and type the default IP address
http://192.168.1.2 in the Address bar and press [Enter]. When the login page
appears, type admin in the Name and Password box, and then click Login.
Login Screen of Web Configuration Utility
NOTE:
1. Extensive knowledge of LAN will be helpful in setting up the camera.
2. The computer’s IP address must correspond with the camera’s IP address in the same
segment for the two devices to communicate.
Enter the default
IP Address in the
Address bar.
Enter the default
username and
password.